K500

  • K500 is an operator designed for the automatic operation of sliding gates and doors up to 500Kg of weight. Simple and functional, it can be used for any type of entrances of detached houses, apartment blocks and large companies premises.
  • K500 unit allow a fast and simple installation. The materials used to manufactured the variouscomponents pretect them against water, dust and rust. The electric motors are protected by heat probes. The mechanical gears, with components lubricated using a special synthetic grease, have been designed and created to guarantee maximum strength and long-term reliability.
  • K500 with K-CRX control board is equipped of slowing down of the gate in approach, giving to the movement one feeling of still greater safety and fluidity.
  • With a 5 meters long gate it allows to obtain until 25 consecutive maneuvers guaranteed before entering in pause of overheating.
  • The supplied iron plate permits to adjust the height of the operator and the ground implantation with expansion screws or through cementation of its parts.
  • K500 can be installed on the same base plate of the K5.
  • Release with personalized key.
  • External traction gear in sintherized steel.
  • It is available on request also in the ventilated version.

Download Manual Download Brochure

——————————————————————————————————————————————————

K800, K1400

K units are a series of operating devices, with KS control boards builded inside, created for automatic movement of sliding doors and gates weighing up to 2200Kg/4846lbs. They are available in various versions, for easy and functional use anywhere from detached homes or apartment blocks to large company premises.
They are equipped with gradual start, electronic adjustment of the force, electronic brake (as standard features) and with OPTICAL ENCODER in the PLUS version
The ENCODER, which is included in the PLUS version, indicates when the gate comes into contact with an obstacle, and reverses the movement (as required by new European regulations EN12453, EN12445) without the need to fit edge sensors.
In the version K800 24V, the low voltage motor combined with the encoder also allows slow-down of the gate when shutting, giving the movement a still greater sense of safety and fluidity.
In the event of a power cut your gate will not remain locked because using the customised key provided, you will be able to open it with ease.
K800 24V version with the buffer batterie mean that black-outs will pass totally unnoticed. In fact it is possible to do up to 150 cycles during the black out period on a 3mt long sliding gate.

Download Manual Download Brochure